Featured Tools and Products

Don't let this size (5.7lbs.) fool you. With 560 in.lbs. of pure torque power, this 18V 1/2" Driver-Drill out performs the competition. Makita's exclusive "Shift-Lock" Drive System locks out the Clutch completely when drilling holes - giving you pure power unmatched by anyone. The 3-speed all-metal gear transmission is built to handle even the toughest conditions. Locking ratcheting chuck securely grip all bits and the two-piece D-31 Makita motor with dual ball bearing construction prolongs tool life. Expect the best and get it with Makita. Kit includes (2) batteries, Charger, Keyless Chuck and Case.

Benchtop router table; attaches to any workbench

• 2 adjustable featherboards; dust collection port; dual outlet switch; 6-foot power cord
• Aluminum fence with MDF face plates; aluminum router mounting plate
• Includes router table, 3 mounting plate insert rings, mounting hardware for most Bosch routers, 2 featherboards, adjustable clear guard, starter pin and guard, outfeed fence shims
• 27-inch by 18-inch work surface; 1-year warranty

The 23-gauge pin nailer kit from Bostitch is ready to upgrade your woodworking operation with its hefty pin capacity. This tough model holds fasteners from 1/2-inch to 1-3/16-inch, which is a generous 19 percent increase over competitive models. Specially designed to minimize downtime, the HP118K’s side-loading magazine adjusts to different fastener sizes automatically and houses up to 200 pins at a time; and the low-profile tip tapers down to the contact point for a clear line of sight from any angle. The HP118K is packed with helpful convenience and performance features, including an integrated high/low power control for precise depth setting without changing your compressor settings. It also boasts a dual trigger for safe operation, 60 in./lbs. of power, a rear exhaust, and an overmolded grip for maximum comfort. This versatile nailer can countersink 1-3/16-inch pin nails into hard woods -- even oak and maple -- with ease. With its lightweight aluminum body, the HP11k weighs just 2.17 pounds so you can lift and drive fasteners all day with less effort and fatigue. And since it's such a compact little brute (just 7.81 by 9.06 inches), you can maneuver it into all kinds of tight spaces without a hitch or a hang-up. This nailer accepts Bostitch, Senco, Accuset, and Porter-Cable 23-gauge pin nails; and this kit includes the nailer, 1/4-inch air fitting, and a plastic carrying case -- plus 500 each 1/2-inch nails, 3/4-inch nails, and 1-inch nails.